It should be 30-35 psi with the engine running.
It is normal for fuel tanks to develop positive and negative pressure as the car operates and the temperature changes.
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
Nothing. The Villager can run any normal ethanol-oxygenated gas up to 15% with no problem.
Just normal DOT3 brake fluid.
normal blood pressure reading
The normal blood pressure is usually between 120-140 mm Hg (systolic) and 80 - 90 mm Hg (diastolic). Anything higher will be considered as high blood pressure
120/180
I found this on http://healthfullife.umdnj.edu - Optimum blood pressure - less than 120 millimeters of mercury systolic and less than 80 millimeters of mercury diastolic - Normal blood pressure - 120 to 129 millimeters of mercury systolic, 80 to 84 millimeters of mercury diastolic - High normal - 130 to 139 millimeters of mercury systolic, 85 to 89 millimeters of mercury diastolic
Blood pressure readings are always expressed as two values, one high and one low, representing the squeeze (systolic) and relax (diastolic) phases of the heart's pumping. The units of blood pressure are millimetres of mercury - that might seem a strange kind of measurement but it's really just seeing how far up a tube the pressure can push a column of mercury. So the full expression is, for example, 120 millimetres of mercury or 120 mmHg. (Hg is the symbol for mercury. It is an abbreviation of the Latin phrase Hydragyrum which means silvery liquid). Mercury is used because its density means that a conveniently short tube can be used. Normal blood pressure is a reading under 120/80 Pre-hypertension is a reading between this and 140/90 High blood pressure is anything over this.
normal blood pressure reading
Normal blood pressure is measured by two numbers that represent how much mercury is in your blood. A completely normal blood pressure reads: Below 120 / below 80.
The newest recommended reading is 110/70