0
The factory wheels on a 1998 GM SUV, such as the Chevrolet Tahoe or GMC Yukon, typically have an offset of around 0 to +6 mm and a backspacing of approximately 6 to 6.5 inches. These measurements can vary slightly depending on the specific model and wheel size. It's important to check the wheel specifications for your particular vehicle to ensure compatibility with aftermarket wheels.
What else can I help you with?
Will 15 inch wheels with 4.75 inch backspacing fit on a 2005 Chevrolet Silverado?
The rims should fit on that truck...the only concern would be if they upsized the brake pads from 1998. i have a 98 and had fifteens on it for a while without any problems. the 4.75" backspacing is just a measurement of how far the wheels will stick out...not 4.75 inches, but the difference between that and the factory backspacing. EX: if the backspacing on those rims from the factory are 3" your rims should stick out an additional 1.75 inches. hope this helps ya out! The rims should fit on that truck...the only concern would be if they upsized the brake pads from 1998. i have a 98 and had fifteens on it for a while without any problems. the 4.75" backspacing is just a measurement of how far the wheels will stick out...not 4.75 inches, but the difference between that and the factory backspacing. EX: if the backspacing on those rims from the factory are 3" your rims should stick out an additional 1.75 inches. hope this helps ya out!
What is the 1998 Porsche 911 wheel offset?
The front wheels were 17x7 with a 55 mm offset and the rear wheels were 17x9 also with a 55 mm offset. Greg Phillips The front wheels were 17x7 with a 55 mm offset and the rear wheels were 17x9 also with a 55 mm offset. Greg Phillips
Will 2009 Ford Mustang rims fit a 1998 Ford Mustang?
No, the two separate model years you mentioned require a different offset and backspacing from one another. They will not work.
Will the 2008 factory mustang rims fit a 1998 mustang?
i believe you will need a spacer to offset the wheel
What is factory wheel size on 1998 Chevy s-10?
wheels or tires? the wheels are 15 inch the tire size is 235/70/15
Will 2005 Mustang wheels fit a 1998 Ford Crown Victoria?
No, 2005 Mustang wheels will not fit a 1998 Ford Crown Victoria without modifications. The bolt pattern, offset, and hub diameter are different between the two vehicles. The Mustang typically has a 5x114.3 mm bolt pattern, while the Crown Victoria has a 5x4.5 inch (or 5x114.3 mm) pattern but with different offset specifications. Additionally, the size and width of the wheels may also differ, affecting compatibility.
Will 2002 mustang wheels fit a 1998 Windstar?
No, 2002 Mustang wheels will not fit a 1998 Windstar without modifications. The bolt pattern, offset, and wheel diameter are typically different between these two vehicles, making direct compatibility unlikely. It's important to check the specific measurements for both vehicles before attempting to use the Mustang wheels on the Windstar.
What other wheels fit 98 Honda Passport?
The 1998 Honda Passport has a 5-lug wheel pattern with a 5 x 4.5" (114.3mm) bolt pattern. Many other wheels will fit your Honda Passport including: Factory Honda wheels Wheels from other Honda vehicles with the same 5 x 4.5" bolt pattern Aftermarket wheels with the same 5 x 4.5" bolt patternBe sure to select wheels that also have the correct offset and center bore for your Honda Passport. You can find wheels with the correct specifications at most tire and wheel shops as well as online retailers.
How much is the offset on 1998 Toyota Tacoma 15x7 rim?
The offset for a 1998 Toyota Tacoma with 15x7 rims typically ranges between 0 to +20 mm, depending on the specific wheel design and manufacturer. However, the most common offset for factory rims is around +10 mm. It's essential to check the specific wheel specifications or consult with a tire professional for the most accurate information related to your vehicle.
What Ford wheels fit on a 1998 Windstar?
The 1998 Ford Windstar typically uses 15-inch wheels with a 5x114.3 mm (5x4.5 inches) bolt pattern. Compatible wheels can come from various Ford models, especially other Windstar years and models like the Ford Taurus and Mercury Sable from the same era. It's important to ensure the offset and center bore match to maintain proper fitment and performance. Always verify specifications before purchasing replacement wheels.
How do you diagnose and fix problems with the fuel line on the right hand driver's side wheel You bought 16 inch wheels for your 1998 1.1 SX Saxo?
Were they a 'recommended' proper fit for your car. It may be that the wheel 'offset' value is wrong for your vehicle. You would have to check that the wheels you bought were a technical match for your model. The offset is important as it stops fouling of other component parts such as you seem to be experiencing. Ask your supplier !
Will 1998 - 2001 Cadillac Catera wheels fit on a 2001 or newer Impala?
No.The Catera factory lug pattern does not match any Chevy Impala lug pattern
