0
What is the proper plug wire sequence on the distributor cap for a 1998 Dodge 6 cylinder?
Simply log online to: Jim's Ask A Tech This is a legit site and very informative.
i just changed my distributor cap yesterday on a 98 Dakota 3.9L
from the passenger side looking at the cap the post in front of the screw is 1 they go clockwise around the cap 1,2,3,4,5,6, the plugs are located as passenger side front to back is 2,4,6 and driver side from to back is 1,3,5 i bought a haynes manual at auto zone to use when doing my tune ups and maintenance it really helps
What else can I help you with?
What is the proper plug wire sequence on the distributor cap for a 1999 Dodge Durango 8 cylinder?
Look on top of the intake manifold for the firing order. Then make sure they are in the right order at the distributor.
What is the proper plug wire sequence on the distributor cap for a 1994 dodge Dakota magnum v6?
The wire sequence on the distributor cap just goes 1 thru 6, clockwise, starting from the number one position (which should be marked either on the cap or distributor).
Where is the camshaft sensor located on a 2000 dodge stratus?
4 cylinder it is on the end of the head. 6 cylinder it is in the distributor.
What is the spark plug wire order on the distributor cap on a 1998 Dodge Dakota 4 cylinder?
The firing order for all Dodge truck 4 cylinder engines is 1-3-4-2 and the distributor rotates clockwise.
Where is the distributor located on a 1999 dodge avenger?
On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.On the 2.5 L it is on the end of the rear cylinder head.The 2.4L does not have a distributor.
Where is the distributor cap on 1997 dodge stratus?
Four cylinder engines, do not have one. Six cylinder, it is on the driver side end of the rear cylinder head.
What is the spark plug wiring order on a 1998 dodge Dakota 6 cylinder?
in what order are the spark plug wires on the distributor cap on a 1998 dodge Dakota 6 cylinder
What position is the 1995 dodge 1500 distributor intermediate shaft 318 5.2L go in?
The distributor intermediate shaft for a 1995 Dodge 1500 with a 318 5.2L engine is positioned vertically, connecting the distributor to the engine's camshaft. It fits into the engine block, allowing the distributor to rotate and distribute ignition spark to the correct cylinder at the right time. Proper alignment is crucial during installation to ensure accurate ignition timing.
Where is number 1 cylinder plug wire go on your 1997 dodge 5.9 distributor?
Click the link.
Where do you start number 1 plug wire on distributor cap on a 440 Dodge engine?
To find the number 1 plug wire on the distributor cap of a 440 Dodge engine, start by locating the distributor and the cap. The number 1 cylinder is typically the driver's side front cylinder (nearest the radiator). From there, follow the rotor's rotation direction (usually counterclockwise) and place the number 1 wire in the corresponding position on the cap, then continue placing the other wires in the proper firing order.
What is the timing sequence for a 1990 Dodge Dakota 2.2 liter?
1-3-4-2 and the distributor rotates clockwise.
Where is the distributor for a 96 dodge neon located on the car?
A Dodge Neon does not have a distributor.A Dodge Neon does not have a distributor.
