100ft/lbs
225 ft lbs
What is the tonque specs on the front wheel bearing for an 02 ford F150
a quarter turn before you strip the nut out
Check owner's manual. If you don't have one copy and paste link below; www.fleet.ford.com/maintenance/owners_manuals
Go to Ford Muscle.com and scroll down to the trucks section and ask your question there. Good Luck.
f150 can a4 wheel drive wheel fit on a 2 wheel drive f150 both 6 bolt pattern
ford f150
special socket required to remove nut that retains rotor and wheel bearing. use impact gun . be prepared to repack and reset wheel bearing
The torque is 89 inch pounds or 7.41 foot pounds. You should never reuse a transmission gasket. If you are doing work on the transmission, replace the filter, it usually comes with a new gasket.
rear wheel drive or 4x4 capable
No , rear wheel drive or 4X4 capable
remove the wheel then the brake drum then tap out the old studs with a hammer and pull in the new stud with some washers to protect the threads and tightening the nut until the stud is fully home reinstall the drum and the wheel and torque bolts and you are done good luck