6x9
The Antenna is built into the rear window.
remove the speaker covers from fear deck. remove the four screws that hold the speakers in the rear deck. four screws hold each speaker in place. unplug the wires from the connecters. if aftermarket speakers cut after plug and splice new speaker wires into existing factory wires. reverse the procedure to install new speakers.
The average cost for the part to replace the rear bumper cover on an Oldsmobile Intrigue varies between $88.00 and $124.00, depending on the year. The labor cost to replace the rear bumper will vary between $75.00 and $150.00 depending on the repair shop.
The Oldsmobile Intrigue has rear wheel bearings that sometimes become faulty. It is possible to replace them by removing the old bearings and installing new or refurbished ones in their place.
Towards the bottom of the oil pan, facing towards the rear of the vehicle.
It in under the driver side rear door, about six inches in. Next to the fuel tank.
The oil drain plug on a 2001 Oldsmobile Intrigue is located on the bottom of the engine oil pan, which is situated beneath the vehicle. To access it, you'll typically need to lift the car safely using jack stands. The plug is a hex or bolt-type fitting, usually positioned towards the rear of the oil pan. Be sure to have an oil catch pan ready to collect the old oil when you remove the plug.
depends on if you have the Bose stereo if you do look under the rear dash in the trunk it would be there
Try the rear side of the radiator approx 1/3 down from the top
6.5"
6.5 inches
The stereo wiring pinout for a 2000-2003 Oldsmobile Aurora typically includes the following key connections: Pin 1 is for the left front speaker positive, Pin 2 for the left front speaker negative, Pin 3 for the right front speaker positive, Pin 4 for the right front speaker negative, Pin 5 for the left rear speaker positive, Pin 6 for the left rear speaker negative, Pin 7 for the right rear speaker positive, and Pin 8 for the right rear speaker negative. Additionally, there are pins for power and ground, which are essential for the stereo to function properly. Always consult a specific wiring diagram for precise details and ensure compatibility with your vehicle's audio system.