One of the signs is the security light will stay on and the car won't turn over. For a while the light will eventually go out and then the car will start. But as the switch totally fails the car won't start anymore.
The timing chain or belt on a 1999 Pontiac Firebird at 98,700 miles does not need to be changed unless it is showing signs of wear or breaks. There is an inspection plate that can be removed to check this. As far as changing other things at this mileage, consider changing the filter and fluid in the transmission. The engine oil should be changed every 3,000 to 5,000 miles.
Signs that indicate it may be time to replace an old light switch include flickering or dimming lights, crackling or buzzing sounds when turning the switch on or off, difficulty in turning the switch on or off, or visible signs of wear and tear such as discoloration or loose connections.
less heat in your car
You can detect a bad dimmer switch by checking for flickering or flashing lights, overheating of the switch, buzzing or humming noises when the switch is in use, or if the lights don't respond consistently to the dimming adjustments. If you notice any of these signs, it may be time to replace the dimmer switch.
Positive factors don't switch signs: Soever not is still not. (-a)/b=(-1)(a/b)
The most tell-tale sign is a single click when you try to start the engine.
most likely the switch or a wire, the motor would probably show signs that it's getting weak or about to quit completely.
A warm light switch could indicate an electrical issue. To troubleshoot, turn off the power to the switch at the circuit breaker, then remove the switch cover and check for loose connections or signs of overheating. If you're unsure, it's best to call a qualified electrician for further inspection and repairs.
It is important to know the symptoms of a part going bad. The signs of an ignition switch going bad is it overheating, no clicking when trying to start, the car has issues starting and running.
In MW2, games usually time out to low internet connection (signs of this is lag). Many of the times, a lag switch is used (causing all users but the owner of the switch to have lag), which will then time out the game.
Failure to turn the starter motor. Flickering lights, especially when you touch the key. Intermittent power supply to the rest of the car.
To determine if a light switch is bad, you can first check if the light bulb is working by testing it in another fixture. If the bulb is fine, then try flipping the switch on and off to see if it feels loose or if there are any visible signs of damage. You can also use a multimeter to test the switch for continuity, which indicates if the electrical current can flow through it properly. If the switch fails any of these tests, it may be bad and need to be replaced.