answersLogoWhite

0

.040

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the spark plug gap for a 76 Chevy 305?

.045"


What is the gap on a 1976 Mercury Outboard spark plug?

There is no gap to set on most '76 Mercs Even if there were there is no clear way to answer the question since there are at least a dozen different models made by Mercury in 1976


Spark plug gap 2001 EZGO TXT?

Gap spark plug as followsMarathon 2 cycle '76 to '94 ----- .028~.030Marathon 4 cycle '91 to '93 ----- .028~.030Medalist 4 cycle '94 to '96 ----- .028~.030TXT 4 cycle '96 to '04 ----- .028~.030ST350 workhorse '96 to '04 ----- .030


What is the best spark plug for a small block Chevy?

72-75 AC R44T 76-80 AC R45TS


What is the gap setting for a 1976 vw?

points gap on a 76 volkswagen beetle


What motor came stock in a 77 nova ss?

there is no such thing as a 77 nova ss last year was 76 that had a 350


What spark plug fits 73 harley Davidson flh?

H-D brand: 3-4 Accel brand: 2401 Autolite brand: 76 Champion brand: J12YC


Does a 70 nova front end fit on a 76 nova front end?

Thru 74 only. You need a 75 & up.


What kind of brake fluid does a 76 Chevy nova use?

DOT 3


What motor frame mounts do you need to put a 400 Pontiac in a 1976 nova?

301 pontiac engine mounts and 76 chevy nova frame mounts


What is the difference between a 1974 Chevy Nova core support and a 1977 Chevy Nova core support?

The 75 - 76 Was a transitional year as for 69 - 74 where the same


How do you replace sparkplugs on 2003 Nissan Pathfinder?

1. Disconnect the negative battery cable. 2. Remove the engine cover. 3. Remove the air duct with air cleaner assembly. 4. Disconnect the harness connectors and harness brackets around ignition coil sides. 5. Remove the electric throttle control actuator. (Only when removing the No. 4 cylinder spark plug) 6. Disconnect ignition coil harness connectors. 7. Loosen ignition coil mounting bolts and pull out coil from rocker cover. 8. Use a spark plug socket to remove the spark plug from the cylinder head. 9. Inspect the spark plug and check the gap. 10. Install the spark plug and tighten to 15-22 ft. lbs. (20-30 Nm). 11. Install the ignition coil and tighten the retainers to 76-95 inch lbs. (8.5-10.8 Nm). 12. Attach the ignition coil harness connectors. 13. If the No. 4 spark plug was removed, install the electric throttle control actuator. 14. Install the harness brackets and connectors. 15. Install the air cleaner assembly and air duct. 16. Install the engine cover. 17. Connect the negative battery cable.