sealed non greasable bearings would be around 65 ft lbs greaseable bearings are just snug up tight w/channel locks then back off slightly to where the nearest cotter pin hole is to allow for heat and expansion of the bearing assembly
What are the torque specs for a 2004 2WD Chevy Tahoe front wheel bearing assembly 5.3 liter engine
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
Front hub/wheel bearing torque is 190-210Nm.
chevy cobalt torque specfront hub
Using new bolts, torque the front hub/bearing assembly to 96 ft-lbs.....
The nut on the axelshaft is 177 ft. LBS. The 4 bolts on the bearing hub is 133ft. LBS.
185 to 260 ft lbs this is the front center nut that holds axle and front wheel bearing together not wheel lug nuts
the bearing assy comes as a complete package with the hub and ABS sensor, etc. --- 3 bolts connecting it to the knuckle (front) or arm (rear)
It is 175 ft lbs for the front wheel bearing of a grand cherokee
The proper torque specification for the front wheel bearing assembly on a 2002 Chevy Cavalier is typically around 85 ft-lbs (115 Nm) for the hub nut. It's important to ensure that the bearing is properly seated before tightening. Always consult the vehicle's service manual for the most accurate specifications and procedures specific to your model.
2003 SATURN L 300 front axle torque spec
what is the torque on front wheel bearings for 1998 honda accord