0
What else can I help you with?
How do you remove the front wheel hub and bearing from a 1989 Ford Tempo FWD?
you need to remove the entire steering knuckle and have a machine shop press out the hub and bearing for you.
How do you replace front bearing on 93 Ford Tempo gl?
To replace the front bearing on a 1993 Ford Tempo GL, first, safely lift and secure the vehicle, then remove the front wheel and brake assembly. Next, detach the hub assembly by removing the axle nut and any bolts securing the hub to the steering knuckle. After that, press out the old bearing using a bearing puller, and install the new bearing, making sure to grease it properly. Finally, reassemble the hub, brake components, and wheel, ensuring everything is torqued to specification.
How do you replace front wheel bearing on 1988 Ford Tempo?
To replace the front wheel bearing on a 1988 Ford Tempo, first, lift the vehicle and remove the wheel. Next, disconnect the brake caliper and rotor to access the wheel hub assembly. Remove the hub assembly by unbolting it from the steering knuckle, and then press out the old bearing using a bearing press or a suitable tool. Install the new bearing into the hub, reassemble the components in reverse order, and ensure everything is properly torqued and secured.
What would cause a 1985 Ford Tempo to make a loud hollow hum from the right front while driving?
Bad wheel bearing, or more than likely a tire with a defect.AnswerIt's normal for a Tempo to hum.
How do you replace front door actuator for 93 tempo?
how do you replace front door actuator for 93 ford tempo
How do you install front wheel bearings on a 1991 Ford Tempo?
This is not an easy job. Best to have it done at your local shop. Labor is about 1 hour per side, bearing cost is around $ 60.00.
What would you do about a bad car bearing the car is a 1989 Ford Tempo GL?
there are MULTIPLE bearings in a car...wheel bearing, engine bearing, ect. you need to be more specific.
How to replace front wheel bearings on a 1993 Ford Tempo?
The front wheel bearing need to be pressed by a press. Unless you have a press, I suggest you take it to a shop that has one and have them do it. The bearings can be found at autozone, or advance auto cheaper than any garage can find them for.
What is the spark plug torque setting on a 1993 Ford Tempo?
The spark plug torque spec range is between 6 and 10 ft/lbs.
Torque specs on transaxle nut for 1990 Ford Tempo?
If you mean the nuts holding the axle/bearing assembly, I believe they should be torqued to 230 foot-pounds, or one 160 pound person standing (not jumping) on the arm of the wrench 1.4375 feet from the center.
Does 1993 Ford Tempo have front wheel drive?
front or all wheel drive
Axle nut socket size for a Ford Tempo?
what size socket for front axle nut 1991 ford tempo
