torque specs for an 89 Chevy Suburban
89 octane Factory specs.
30 ft /lbs
We, Need to know what you need torque specs. ON The year,engine size and what you are doing would be helpfull. You will need to ask your question again. THANK YOU.
Tighten to 20 foot pounds. Do not overtighten.
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
89 lbs. top & bottom
I'm pretty sure this is that same 3800 motor that gm uses in my mom's 2001 buick Le Sabre. Her intake was the fiberglass resin plastic and the torque specs are 89 INCH pounds. Make sure you use the right tightening sequence too. 89 inch pounds is for the upper intake or Plenum. 136 inch pounds is the torque specs for the lower intake
torque specs of what?
The Helm factory service manual states that the front should be 118 pounds. The rear specs should be 89 pounds.
the torque specs for the 5.4 is 350ftlbs of torque
The torque specs for the rocker arms on a 2001 Oldsmobile Alero 3.4 liter V6 is 7.42 ft. lbs. It is 89 inch-pounds and 18.98 N-m.Ê
There is no torque spec for the air filter --it sits in its housing which snaps open and closed.The intake manifold torque specs are 89 inch pounds (7.5 ft.lbs.), that is for both the upper and lower intake.