answersLogoWhite

0

The easiest way to answer this would be to remove a taillight and look at the wires on the back of the "backup" light bulb socket. This is also a good place to tap into the wire, provided that you are able to route the new wire so as not to rub on any sharp surfaces. For example, if you are trying to tie the backup light circuit into an aftermarket stereo fitted with a reverse camera, you will need to be able to route the wire all the way to the cab of the vehicle without leaving it exposed to damage from rubbing, weather, and other possibilities. If you are trying to tie the circuit into a trailer lighting system, the same rules apply but with a lot less wire (as the wire only needs to go a few feet to the trailer hitch). Same applies for a backup alarm.
Hope that helps.
JB

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Is there a relay for the backup lights for a 1973 volkswagen Super Beetle?

Yes, the 1973 Volkswagen Super Beetle does have a relay that controls the backup lights. This relay is typically located in the fuse box or near the transmission. If the backup lights are not functioning, it's worth checking both the relay and the associated wiring for any issues. Additionally, the backup light switch, which is often mounted on the transmission, can also be a common point of failure.


Who were the Backup quarterbacks in Super Bowl xxxi?

Favre was the backup for that season behind Don Majkowski who was injured that same season. Favre was brought in and became the starter from that point on.


How can I control remote control can lights in my home?

To control remote control can lights in your home, you can use a compatible remote control device that is specifically designed for the lights. Simply point the remote at the lights and press the appropriate buttons to turn them on or off, adjust the brightness, or change the color if they are color-changing lights. Make sure the remote control and the lights are within range for proper functionality.


Did Tom Brady play in the 1997 national championship game?

No, in 1997 he was a backup to Brian Griese


What is the point of Christmas lights?

To brighten up the darkness of winter and to add color and fun to bring about some Chsitmas cheer to the atmosphere of a room.


How can one restore files from a backup point?

One can restore files from a backup point by following the instructions carefully. Usually one needs to be an administrator with full access on the computer.


When was North Point Range Lights created?

North Point Range Lights was created in 1822.


When was Haszard Point Range Lights created?

Haszard Point Range Lights was created in 1889.


When was Doubling Point Range Lights created?

Doubling Point Range Lights was created in 1898.


When was Bloody Point Range Lights created?

Bloody Point Range Lights was created in 1883.


Where can you get a copy of windows backup software?

Windows has a built-in backup feature. When you first purchase your machine you should immediately make a backup using the backup utility program and keep this in a safe place. If you have not done this, there is a feature called create and restore which will backup your computer to the last restore point. This is not a complete backup but it is helpful.


What was the lowest point spread in Super Bowl history?

The lowest point spread of a super bowl was one point