Maybe a short somewhere...did you replace the flasher unit? No - it was blinking spuradically(?) - now I have to blink it manually and it won't blink at all with lights on.
Yes, but the signal lights are the wrong shape.
turn signal flasher
When the signal lights are not working on a car, there are a couple of things that could be going on. One could be that the bulb needs to be replaced. The other possibility is that the signal relay needs to be replaced.
The whole turn signal arm unit needs to be replaced
do you mean you replaced the bulb? are the flashers out on both sides of the vehicle? did you check both front and back? do the lights on the dash do nothing or come on and stay on? you need to provide this information for a proper diagnosis
The Turn Signal Switch is bad in the column and needs to be replaced.
If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.
Where is the signal flasher located on a 1987 Oldsmobile Cutlass Ciera?
Try turn signal flasher usually around the fuse box
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
Probably the flasher unit needs to be replaced. This is an electronic switch which usually mounts underneath the dashboard.
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.