2.2 and a 3.1 both will work but you will need to keep the same transmission with the same motor so thay will match up
Remove the wiring harness from the 1996 Chevy Cavalier blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install the new blower motor.
Yes
To change the motor in the 1996 Chevy Cavalier driver's side window, first pry the interior door panel from the door. Then, remove the motor by first disconnecting the vehicle's battery and then disconnecting the wiring to the motor. You can then remove the screws that hold the motor in place.
what are the signs for replacing the oil gasket in a 1996 Chevy cavalier
no they have slightly different head/intake setups, but the blocks should be interchangeable.
I don't see why not they were the exact same car from1995 thru 1999.
where is 1996 cavalier convenience center
Instructions on how to change the rear hub wheel bearings on a 1996 Chevy cavalier
No, at least not easily and legally. The 1991 has a 2.5 liter inline four related to the old Iron Duke, whereas the 1996 has a 2.2 liter shared with the Chevy Cavalier and the Pontiac Sunfire.
do you mean cavalier hand brake?
Don't mark me specifically on a cavalier, but I'm pretty sure it's at the back of the motor (by the firewall) on top. It's toward the center of the motor. (Just went through that with my vehicle.) Good luck!
if the motor is a 2.0 or 2.2 the filter will be on the backside of the motor mid-passenger side purolator filter #10111 fram filter #ph47 Lider