For a 2003 Jeep Grand Cherokee, the fuse for the backup lights is typically a 15-amp fuse located in the fuse box under the hood. Always refer to the owner’s manual or the fuse box cover for the exact location and specifications, as they can vary slightly by model and configuration. If the backup lights are not functioning, check this fuse first, along with the bulbs and wiring.
how do you replace backup lights on 99 grand am?
I would check the wires just behind the light. I had the same problem and the wires were broken a little just wiggle them as the lights are on.
I would check the wires just behind the light. I had the same problem and the wires were broken a little just wiggle them as the lights are on.
What are the wire color codes on the tail lights of a 03 jeep grand Cherokee?Read more: What_are_the_wire_color_codes_on_the_tail_lights_of_a_03_jeep_grand_Cherokee.
If you browse this website you will be able to find what you need: http://www.jeep4x4center.com/mopar/jeep-grand-cherokee/backup-parking-sensor.htm
if it is a jeep Cherokee it needs a neutral safety switch mounted on the passenger side of the transmission. if it is a jeep grand Cherokee it needs the backup switch located on the drvers side of the transmission
No>
check your fuses
No.No.
Possible, but doubtfull
Check your fuse. Usually the manufacturer has the dash lights and the tail lights on the same circuit.
It should say TAIL for taillights or maybe brake lights.