According to the 1996 Ford Probe Owner Guide :
For the manual transaxle ( transmission )
( Ford SAE 75W/90 gear oil , meeting Ford specification API GL-4 )
how to check the fluid on a manual transmission for a 1989 ford probe gt
You can use any SAE certified manual transmission fluid in your 1996 Ford manual transmission. Make sure you use manual transmission fluid and not automatic transmission fluid.
Negative......V6 uses different trans than I4
If its a manual transmission: There isn't one you have to pull the plug on the transmission itself.If its a automatic transmission: Its located near the firewall on the passengers side of the engine compartment.Hope this helps!
The manual transmission from the Ford Probe GT 2.0L is not directly compatible with the 2.5L model from 1996. While both vehicles share some components, the 2.5L engine typically requires a transmission designed to handle its increased power and torque. Therefore, it's best to use the specific transmission matched to the engine variant for optimal performance and reliability.
Motorcraft MERCON automatic transmission fluid is used in the 5 - speed manual transmission in a 1996 Ford Explorer
sawzall or a cutting torch! ;-)
3.9
no but if you can find an 88 to 92 tranny it will work fine
why would you want too
If this is truly your question you shouldn't be driving a car.
The 5 speed manual transaxle takes Motorcraft MERCON automatic transmission fluid ( according to the 1996 Ford Contour owners manual )