0
What else can I help you with?
Where is the dimmer switch on a 1999 camaro?
the multi-function turn signal stalk pushes into the dimmer...some parts places list it as the wiper control module or switch, some have it as the actual turn signal switch.
Function block diagram of the digital multimeter?
A digital multi meter is what is used to find electric current. A block diagram shows all of the working parts of the multi meter and how they are connected.
Why doesn't my 1995 Jeep wrangler brake lights work The lights work though. I replaced the brake switch and checked all the fuses.?
I have the same problem with my 1998 wrangler, I have been told it is the Multi-function switch in the steering column, but I have not changed it yet, can't seem to find it at local auto parts store!
What are the five parts of keyboard?
There are more than five parts of the keyboard. Four parts of the keyboard are the typing keys, the numeric keypad, function keys, and control keys. The last part of the keyboard is the extra keys.
30 parts of single lens camera and its function?
Parts of a single lens camera are film rewind knob, expressure adjustment knob ,control panel ,on and off switch ,shutter release button ,self timer indicator ,lens release button, camera body ,objective lens ,focus selector ,film speed, multi exposure mode ,film advance mode, hot shot contact ,and the accessory shot. All which are self explanatory .
Chemicals produded in one part of the body that control function in other parts of the body?
hormones
Temperature control for 1997 Ford Ranger with AC does not work?
the control is electrical i do believe so you would need to replace the switch. the switch is behind the knob you turn. of course you will need to remove some parts to get to it.
What is the function of a slide switch?
Slide Switches work on the principle of connecting disconnected parts to each other. The 'switch' connects two parts allowing the current to pass through it.
Wipers on 93 mercury tracer wagon do not work ive replaced wiper motor and Relay also fuse is not blown?
could be the multi function switch if its not the relay. the mutifunction switch assembly runs about $240 at parts store or go to a junk yard. You have to remove the steering wheel to replace it. probably need an impact or a breaker bar and a friend to hold the steering wheel.
How do you change the Bright light switch in a 1987 Chevy s-10 blazer and would it be better to have the dealership do this where could i find a free online manual that would show me how to do this?
the multi-function switch (dimmer, turn signal, washer/wiper control lever) is usually available from your local parts retailer so you are able to get it from a source other that the dealership. typically, with the correct tools, a mechanically minded individual should be able to replace the switch in about an hour or so. as with most automotive electrical repairs, be certain to disconnect the battery before proceeding to avoid an electrical short and possible fire. good luck
Why does my high mount brake light come on but not my other brake lights?
If you have directional lights, tail lights, and hi - mount brake light that works but no lower brake lights, replace the multi-function switch on the steering column. Order from MONSTER Auto Parts online for about $90.00. Buy from dealer 300-400.00. Parts house 200-300. No need to replace the 4 way flasher even though they do not work. They will when you replace the MultiFunction switch. Good luck!
5 parts of keyboard?
There are five main parts to most desktop keyboards. These parts include the alphanumeric keypad, the numeric keypad, the arrow keys, the control keys, and the function keys.
