answersLogoWhite

0

The key will need to be forward on notch to unlock the steering. If you tow with the front axle on the ground, the transmission will fail unless you have a fluid circulation system installed.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What position does your key need to be in to tow a 2001 Chrysler Sebring?

It depends on how you are wanting to tow it. If you tow it four wheels on the ground, you will destroy the transmission so the key position doesn't matter. The key would need to be one notch forward to unlock the steering.


How do you reset the factory alarm on a 2005 chrysler sebring convertible?

Unlock the door with the remote or with the key.


What does it mean to cycle the key 3 times on a sebring?

turn the key from the off position to the on position without starting the car 3 times, finishing with the key in the on position but without the engine running. this enables the check engine light to display any engine fault codes.


How do you disable the alarm on a 2000 Chrysler Sebring Convertible?

Key in driver's side door - turn to "unlock" position - stops the alarm


How do you disable the alarm system on a 1996 Chrysler Sebring?

Key in driver's side, pass side, or trunk - turn to "unlock" position - stops the alarm


I have a 2002 sebring and need to know what size ratchet wrench to use to remove the guide pins for brakes?

You need a 7mm Allen key.


How do you program a new key for a 2005 scion tc?

To program a new key for a 2005 Scion tC, you'll need to have the new key and an existing master key. Insert the master key into the ignition and turn it to the "On" position for a few seconds, then back to "Off." Remove the master key and insert the new key, turning it to the "On" position for about 10 seconds. Afterward, turn it back to "Off," and your new key should be programmed and ready to use. If you don't have a master key, it's best to consult a dealership or a locksmith.


Chrysler sebring ignition damage by thief key doesn't work how do you replace?

Chrysler sebring ignition damage by thief key doesn't work how do you replace?"


Does the 1999 Chrysler Sebring have a chip in the ignition key?

If the key is gray, then yes.


How do you disable seat belt chime in 2005 Sebring convertible if the seat belt light never goes out?

To disable the seat belt chime in a 2005 Sebring convertible, first ensure the seat belt is secured. Then, turn the ignition key to the "On" position without starting the engine, and buckle and unbuckle the seat belt three times within 10 seconds. This should reset the system, and if the seat belt light remains on, you may need to check the seat belt mechanism or consult the owner's manual for further troubleshooting. If issues persist, consider seeking assistance from a professional mechanic.


Is there a battery in the key of a 1997 Chrysler Sebring?

No.No.


How do you get into the trunk of a convertible sebring without the key?

I have a 97 Sebring convertible, my trunk will not open, I tried using the key and the remote, is there an emergency release cable anywhere else in the car?