750 rpm
You need a new IAC Idle Air Control.
where is the idle control motor for a 1998 ford escort
The idle air control valve on a 1990 Ford Escort is located on the intake manifold. An idle air control valves function is to control the amount of air that is allowed to enter the engine so the idle can stabilize.
There is no idle screw. The idle air control valve controls the idle and can be set on different settings. You should consult a Ford dealer or mechanic for proper settings.
The idle setting for a 2001 ford escort zx2 is something that is not owner adjustable. It the idle is off, check for vacuum leaks or a clogged air filter.
Idle speed control or Idle air control.
It is located under the intake manifold between the engine and the firewall.
maybe the valve timing is a little bit out
The fuel pressure on a 1998 Ford Escort should be between 40 and 60 psi at idle and not drop below 35psi under acceleration.
A 1994 Ford Escort will experience rough running with the AC on if the compressor is going out or the idle is set too low. The additional load produced by the compressor puts a strain on the engine.
To adjust the idle speed control on a 1985 Ford Escort, locate the idle speed adjustment screw on the throttle body. Start the engine and let it warm up to normal operating temperature. Use a tachometer to measure the idle RPM, then turn the adjustment screw to increase or decrease the idle speed as needed, ensuring it falls within the manufacturer's specified range. Finally, recheck the RPM after adjustments and ensure that the engine runs smoothly.
idle valve is on the top of the engine held on by two bolts it is called an iac valve. it is about 5 inches long and has a plug with only two pins in it