order the belt for your car and say it does not have ac
what belt size to a 302 bypass for removal of smog pump and AC
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
The size of belt to use to bypass the ac on a vortec s usually 5.7L. You should ensure that you have the correct bracket and belt size.Ê
The 2001 Ford Expedition has a V8 engine.
The 2001 Ford Expedition has a 4.6 L base engine size.
To bypass the AC compressor on a 2002 Ford Expedition with a 5.4-liter engine, a serpentine belt size of approximately 84.5 inches (or 2140 mm) is typically required. It's important to verify the specific routing and length based on your vehicle's configuration, as variations can exist. Always consult the vehicle's manual or a professional for the most accurate information.
The only thing you can do is taking a spring and run it across the belt pulleys bypassing the air compressor. Then go to the parts store and have the sale person measure string and compare with the new belt.
you cant. the top side of the belt will rub on the a/c pully
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
To bypass the smog pump on a 1984 Corvette, you typically need a shorter serpentine belt, as the pump will be removed from the system. The exact belt size can vary, but a common replacement size is around 77 inches. It's always best to consult a repair manual specific to your vehicle or check with an auto parts store for the most accurate size for your setup.
6x8