The top are 8 mm and the bottom are 10 mm
Remember, that is wrench size.
The alternator retaining bolt size is 9/16. The alternator bolts will be three inches long. The alternator tensioner bolt is 9/16 by one inch.
8mm x 1.25
Dime sized bolts.
15 millimeter and/or 13mm.
The 1995 Mitsubishi Eclipse alternator retaining bolt size is 9/16 by 3.5 inches long. There will be three alternator retaining bolts.
Why not just try different size sockets until you find the correct size.
16 inches.
Depends On What The Starter Is From. Car Model Engine Size, Or Mounting Bolts Ect. If It Is The Bolts That Assemble The Starter< You Can Get These At A Starter Alternator Shop. The Mounting Bolts. Drop By The Dealer Parts House They Can Fix You Up.
Type your answer here... For a 4.6l get a half inch breaker bar and insert that into the belt tensioner to loosen the belt, then disconnect the power cable (on the top of the alternator) then remove the bolts sorry can't remember what size the bolts are
They are either T40 or T45?
My 1997 Chevy Cavalier with 2.2L motor used a 15mm socket.
what year diesel what size diesel if it is 7.3 powerstroke, u remove serpentine belt next you unplug wire harness from back of alternator then you remove 2 bolts that hold alternator to engine lift alternator off installation is exact opposite easiest alternator to change out