Type your answer here... For a 4.6l get a half inch breaker bar and insert that into the belt tensioner to loosen the belt, then disconnect the power cable (on the top of the alternator) then remove the bolts sorry can't remember what size the bolts are
Thunderbird - train - was created in 1995.
Where are the vacuum hoses on a 1995 ford thunderbird 4.6l engine?
A 1995 Ford Thunderbird is OBD I , EEC IV
This has been answered previously, you access it from below after pulling the splash plate off.
Common mechanics hand tools. Sockets, ratchets, open & boxed end wrenches. More than likely metric.
The regulator for the 1997 Ford Thunderbird is bolted on the back of the alternator. While the regulator can be changed separately it is more commonly changed along with the alternator.
For a 1995 Ford Thunderbird , 4.6 : I believe that is rated at ( 205 horsepower from the factory )
Purchase new blades from your local auto parts store and they will install them for free (and you get to see how it's done).
how much hp does 1995 ford thunderbird have
Piece of Cake!! remove serpentine belt (search here for answer how to), remove the lower of 2 bolts from the alternator, loosen the upper, rotate the alternator up, remove the bolt. Install is the reverse.
To replace the alternator on a 1995 Mazda Miata, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from the engine. Disconnect the electrical connections from the alternator, install the new alternator, reconnect the electrical connections, and reattach the serpentine belt. Finally, reconnect the battery cable and start the engine to test the new alternator.
alternator bad