0
12
What else can I help you with?
What is the standard half sheet tray size used in professional kitchens?
The standard half sheet tray size used in professional kitchens is 18 inches by 13 inches.
What is the perferred socket for tray work?
The preferred socket for tray work is typically a deep socket, as it allows for greater depth to accommodate the full length of the hardware being used. Deep sockets provide better access to fasteners in tight spaces or recessed areas, ensuring a secure grip and minimizing the risk of rounding off the fastener head. Additionally, using a socket with a proper drive size can improve torque application and overall efficiency during assembly or disassembly tasks.
What is the standard light bulb socket size used in most households?
The standard light bulb socket size used in most households is called an E26 or medium base socket.
What size socket is used for removing head bolts on Toyota RAV4?
there is 19mm socket
What size socket is used for the crank pulley of a 2.4 4-cylinder?
22mm socket. Good luck!
2002 F-150 lug nut socket size?
i used a 27/32
What size Socket is used for the crank pulley of a 2.5 4-cylinder?
it would be a 19mm or a 22mm
What exactly is socket 754 typically used for?
Socket 754 is primarily designed for computer microprocessors with operating frequencies ranging from 2.4Ghz for desktops and 2.6Ghz for laptop computers. They were introduced in 2003.
Which series of CPU used on socket-7?
Older X86 Architecture that was primarily used as a replacement for Socket 5. Commonly used for the Intel P5 Pentium processors. Also used for AMD K5 and K6 processors. Supported speeds from as low a 70mhz to 233mhz.
What size socket for new oil switch from AutoZone for a 2000 Honda crv?
Unsure exactly what it is that is being asked about. The part number of the switch, or the size of the socket used to install it. Whatever. . . it will be in millimeters, there are no SAE parts on the vehicle
Which type of tray used in Demethanizer column?
sieve tray
What is the socket size for the Caliper bolt on a 2007 Kia Sorento?
14mm socket is used for main mounting bolts, there are two. The caliper alignment pins use 12mm
