0
What else can I help you with?
What tool do you use to take out battery?
The correct size socket and ratchet to remove the hold down. And the correct size socket to remove the battery cable clamp.
How do you change the battery on a 1997 Chevy Blazer?
Remove the ground cable. Remove the support arms that are in the way.Remove the positive cable. Take a ratchet,a 12" extension, and a 13mm socket and remove the holdown fixture located at the bottom of the battery. Install new battery. Reverse procedure. Done.
How do you tighten a loose battery cable?
Use the appropriate socket on the nut and tighten it. Make sure the cable is in the correct position first.
What is involved to changing a battery in 2001 S10 pickup?
Using a 5/16" 6 point box wrench or socket remove the negative battery cable first then the positive cable. Using a 13mm socket with a 10" extension remove the battery hold down bolt and remove clamp wedge. Remove the battery, clean up battery tray and cable ends with water and baking soda and wire brush. Install new battery, reinstall battery clamp and bolt. Attach positive battery cable first then negative cable. You will need to reset clock and radio settings.
How do you change positive battery cable in a 1998 Cherokee sport?
To change the positive battery cable on a 1988 Jeep Cherokee trace the end of the cable to the starter. Unplug the battery then remove the cable from the starter. Measure the old positive cable with the new and be sure to replace the unit at the right size.
How do you change the lighter socket in a 1998 mark viii?
To change the lighter socket in a 1998 Lincoln Mark VIII, first, disconnect the negative battery cable to ensure safety. Next, carefully pry off the trim panel surrounding the lighter socket using a flathead screwdriver or trim tool. Remove the old socket by disconnecting its wiring harness and unscrewing it, then install the new socket by reversing the process—attach the wiring harness and secure it in place before reassembling the trim. Finally, reconnect the battery and test the new socket to ensure it works properly.
How do you change battery in 2004 gmc sierra?
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable
How do you change a battery cable?
Always disconnect the negative battery cable first even if you are changing the positive cable and reconnect the negative cable last. This is to prevent accidental shorts to ground.
How do you change the battery in a 1997 Chevy Malibu?
Remove the old battery, disconnect the negative cable first and install the new battery connect the negative cable last.
How do you change the negative battery terminal on a 1993 Toyota Corolla?
Replace the battery cable with an OEM style cable. Do not use a clamp on terminal.
How do you change the battery cables in a Ford Mercury Mystique?
the whole cable or just the cable ends ??????????????
How do you change the positive battery cable on 2001 Toyota Sequoia?
To change the positive battery cable on a 2001 Toyota Sequoia, first, ensure the vehicle is turned off and the keys are removed. Disconnect the negative battery terminal to prevent any short circuits. Then, remove the bolt securing the positive battery cable to the battery terminal using a wrench, and lift the cable off. Finally, attach the new positive battery cable by securing it to the battery terminal with the bolt, and reconnect the negative terminal.
