0
What else can I help you with?
How many lug nuts are on a 2000 Chevy silverado?
6...
How do you remove a spoiler on a 2002 Toyota Celica gt?
If it's the same as the 2000 it looks relatively simple. Remove the plastic trunk liner by hand and then use a socket wrench (7/16" socket- most likely) and remove 4 nuts- It should then wiggle free.
What size is the rusty nut and where can you get a socket to fit the nut?
Sears sells a special socket to remove rusted, stripped and broken nuts.
How do you change a side mirror on a 1997 Silverado Z71?
from the inside of the door, there is a trim piece on the inside near the mirror, its triangle shaped, that is held in with a plastic "push-in" clip, remove that panel, and the nuts for the mirror bolts will be accessable with a ratchet and socket
How do you remove the tail light cover on a 1997 escort?
Open the trunk and remove the nuts holding the assembly in place. With nuts removed the tail light assembly will come out the back then you can remove the light socket to replace the bulb.
How can you remove lock nuts on alloy wheels without special socket?
have you tried taping two screwdrivers together
What tools are needed to change the rotors on a 2007 Camry?
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
What size socket do you need for the axle nut on a 2006 Pontiac g6?
once you remove the retaining tabs off of the washer that are covering the nuts, it takes a 34MM DEEP SOCKET
How do you change a taillight bulb in 2006 Mustang?
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
How do you change the tail lights on a 2007 mustang?
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
How do you change a tail light on a 2006 mustang?
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
How do you change the tail light bulb on a 2006 Ford Mustang?
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
