14 mm.
To replace the brake line on a 1999 Mercury Sable, first, safely lift the vehicle and secure it on jack stands. Locate the damaged brake line, then use a line wrench to disconnect it from the brake components and remove any mounting clips. Cut and replace the line with a new pre-bent brake line, ensuring proper routing and securing it with clips. Finally, bleed the brake system to remove any air before testing the brakes.
For a 1997 Mercury Sable : ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A )
how do I remove my air bag from my mercury sable
On most Mercury Sable and Ford Contours, the fuse box is located on the firewall just above the brake or clutch pedal. It has a cover that is very easy to remove and the fuses are inside.
To remove the reservoir tank from the master cylinder on an '86 Mercury Sable, start by disconnecting the brake fluid lines and removing any electrical connectors if applicable. Next, unbolt the reservoir from the master cylinder, which may require a socket or wrench. Carefully lift the reservoir off, ensuring not to spill brake fluid. Clean any residue from the master cylinder before installing a new reservoir if necessary.
'P'arking or emergency brake
How can remove the rear seat on a 1990 mercury sable
DOT 3 brake fluid
What kind of brake problem(noise,pulling)?
2002
3/16
On a 1999 Mercury Sable : In the fuse panel by the brake pedal : ( # 17 is a 30 amp fuse for the front wiper / washer )