I just changed oil on my sister-in-law's '02 Prizm. It took a 15mm.
You need a 5/8" spark plug socket.
15mm
a standard 5/8 deep socket spark plug wrench
its a headlight socket!!
The oil drain plug for a 2006 Chevy Cobalt typically requires a 15mm socket for removal. It's important to ensure you have the correct size to avoid stripping the plug. Always use a torque wrench to tighten the plug to the manufacturer's specifications after changing the oil.
Need to know what engine you have.
On the top of the valve cover under the plastic engine cover. Each spark plug will have a electrical connection on top of it that needs to be removed to get to the plug.
To change the front blinker bulb on your 1989 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
They are tough. Try using a spark plug socket that has a wrench hex on it. Place the socket on the plug then take a open ended wrench and place it on the hex to inch the plug out. I have done it this way.
take a punch or chisel and pop the old one out the take a socket the size of the freeze plug and hammer it in
That is the rubber boot that is on the end of the spark plug wire that goes onto the spark plug.
I'm sorry, but WHAT DID YOU DO!?!?!?