Dextron 2
The 1972 Ford Ranger pickup truck transmission holds 12 quarts of transmission fluid. The 1972 Ford transmission can only use a transmission fluid made for Ford transmissions.
Type F
In the Transmission
The front seal of the tranny needs replaced, the tranny will have to come out to replace it.
It depends, if the unit,convertor,lines and cooler are all dry and the unit does not have the deep pan it will hold about 12qts. If you are just changing the fluid and filter only and it's not the deep pan about 4qts will do it.
DOT 3 brake fluid.
Both sides
about 12
For a 1972 Chevy truck, the type of fluid you need depends on the specific system. For the engine, use conventional or synthetic motor oil with a viscosity of 10W-30 or 10W-40. The transmission typically requires Dexron automatic transmission fluid, while power steering systems often use either ATF or power steering fluid specifically designed for older models. Always check the owner's manual for the most accurate specifications.
AnswerDEXTRON III is what is needed for a 1972 Camaro.
To change the transmission fluid in a 1972 Buick Skylark, first, ensure the vehicle is parked on a level surface and the engine is off. Remove the transmission pan bolts and carefully lower the pan to drain the old fluid. Replace the filter and clean the pan before reinstalling it with a new gasket. Finally, refill the transmission with the appropriate type of fluid through the dipstick tube, checking the level as you go.
There were several options available on the 1972 Chevrolet Cheyenne super truck. There were several different options involving the size of the engine. There were several options available as to the transmission.