For a 1998 Cadillac STS, it's recommended to use a coolant that meets the GM specification, specifically an ethylene glycol-based antifreeze. The preferred type is a dex-cool coolant, which is typically orange in color. Ensure the coolant is mixed appropriately with water, usually a 50/50 ratio, for optimal performance and protection against corrosion and freezing. Always refer to the owner's manual for specific recommendations.
The coolant temperature sensor in a 1998 Cadillac Seville STS is in the engine compartment. It is located on the intake manifold.
Location of starter on Cadillac 1998 eta
where is the coolant temperature sensor located in a 1999 cadillac seville sls?
What is the problem when the car is reading service suspension system on my 1998 cadillac seville sts?
where is my cruise control fuse located for a 1998 sts
To add coolant to a 1997 Cadillac STS, open the hood and locate the coolant reservoir, which is typically a translucent plastic tank near the front of the engine compartment. Ensure the engine is cool, then remove the cap from the reservoir and pour the appropriate coolant mixture into it until it reaches the "full" mark. Always check the owner's manual for specific coolant type recommendations and maintenance procedures.
No the engines are not the same.
it should, but the emissions regulations of the 2002 car are different than that of the 1998 motor
For a 2000 Cadillac STS, it's best to use a coolant that meets the GM specification, specifically Dex-Cool (orange coolant). This type is designed for extended life and helps prevent corrosion in the engine and cooling system. Always ensure that you mix it with distilled water in the appropriate ratio, typically 50:50, unless otherwise specified. Regularly check your coolant level and condition to maintain optimal engine performance.
Cadillac STS was created in 2005.
Driver side in water manifold under EGR valve
No, ..