0
The 1993 Ford Ranger uses 80w 90 gear oil in the rear differential. While some people use other mixes for special applications, this is the factory recommended oil for everyday use.
What else can I help you with?
What is the stock gear ratio on a 1998 ford ranger?
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
What is the gear ratio of a 1993 Ford Ranger?
That would depend on what the axle code is ( the axle code can be found on an information sticker on the end of the drivers door or perhaps the latching pillar )
What is the rear end gear ratio of a 1999 Ford Ranger with axle code 86?
I ASSUME axle code " 86 " is the same as it is on the ( 1996 ) Ford Ranger ( 3.73 gear ratio , conventional / non - limited slip )
What front axle is in your 1999 Ford Ranger?
According to www. the ranger station. com ( no spaces ) technical library in 1998 the Ford Ranger went to a Dana 35 IFS front axle . The Dana 35 IFS switched from a reverse rotation gear to a standard rotation gear . Check out the website for more information
How do you tell what gear ratio for a for a 1993 Ford F-150?
look on the bottom of the axle...and there should be a metal tag saying what size and ratio that axle is
What could be wrong with a 1993 ford ranger it will not go in drive?
The shifter linkage is loose or the drive gear is worn out.
How do you tell what is the rear end gear ratio on a 1996 ford ranger XLT with a 2.3 engine?
Open the drivers door and look at the informaion sticker(s) for the axle code Each axle code corresponds to a specific axle ratio
My 1990 ford ranger will not shift into gear?
A 1990 Ford Ranger may not shift into gear if the clutch is out. A clutch can be purchased at any auto parts store.
How do you replace the power steering gear box seals in a 1990 4.0L Ford Ranger?
how to remove a power steering gear box for a 1990 ford ranger 2.9
Have a 1993 ford ranger 4x4 manual trans and just quit cant shift to any gear?
When You Push The Clutch In Make Sure Its To The Floor
What is your 1998 Ford Ranger 4X4 gear ratio?
On your 1998 Ford Ranger 4X4 : Open the drivers door and on the latch pillar is an information sticker One of the things it shows is the axle code ( listed under axle ) You don't say if you have the 3.0L or 4.0L V6 engine or if it is an automatic or manual transmission but that is a really good place to start for a person to answer your question
How can you tell what gear ratio your 99 ford ranger has from your vin?
Open the drivers door and on the latch pillar you will see the safety compliance sticker . Under " axle " there will be a code shown Ask your question again with the axle code and I will try to find out
