0
What else can I help you with?
Where is the drain plug for the differential on a 97 Thunderbird?
There is no drain plug. You can try to suction out the lube but you really need to remove the rear cover to completely drain the differential. And buy a new gasket (or make your own from gasket stock material) to reinstall the cover; use a gasket sealant sparingly on the gasket and bolt threads to get a good seal.
How do you service a differential on a car?
Some vehicles have a differential drain plug, if so then unscrew the drain plug first. If not, then move on to step 2. 1.Unscrew the differential drain plug. 2.Unbolt the differential cover. (set a bucket under the differnetail to catch the oil) 3. Get the gasket off of the differential and differential cover with a razor blade and/or whiz wheel. 4. Replace the gasket with gasket sealer and/or the new gasket. 5.Bolt the Differential cover back on. 6.Fill the differential up in the top drain until the fluid starts to overflow.
What is the torque when replacing the valve cover gasket on a 1994 Nissan Altima and does the gasket require lubricant?
no, use rtv sealant
How do you replace the valve cover gaskets on a 2003 Jeep Liberty?
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
Leak coming from the rear of your mustang gt is the pinion seal or the differential cover gasket?
It may be your differential or your whole rear end or it could just be a worn out gasket.
How do you change the front differential seals on a 1999 Chevy Suburban?
To change the front differential seals on a 1999 Chevy Suburban, first, lift the vehicle and secure it on jack stands. Remove the front differential cover to access the seals, then carefully pry out the old seals using a seal puller or a similar tool. Clean the sealing surfaces thoroughly before installing the new seals, ensuring they are seated properly. Finally, reassemble the differential cover with a new gasket or sealant, refill with differential fluid, and lower the vehicle.
Is rtv sealant necessary when replacing intake manifold gasket in 1994 Chevy 5.7 350 engine?
You need the sealant on the ends where the supplied gaskets don't cover fully.
Why is Vw golf mk4 1.4 leaking oil into spark plugs?
Probably your cam cover gasket (top of engine)leaking into the wells. You can use sealant instead of gasket
Should sealant be used on a 1992 Toyota Previa Valve cover if a gasket is provided?
you should use one or the other,liquid gaskets should take the place of a gasket
Do you need sealant to install a new valve cover gasket?
no the gasket should be rubber and should be bendable all you do is install it in the correct position and tighten the bolts in the right sequence
How do you add front differential fluid 2004 ford explorer?
Remove the 10 bolts that secure the differential cover, pry the cover off, the fluid will drain out, clean the old gasket sealant off of the cover & housing, apply a thin bead of RTV to the diff cover & bolt it back into place, use a criss-cross pattern to tighten the bolts back up, fill the diff through the fill hole on the diff cover, will take aprox 1.5 quarts, stop filling when fluid leaks out of the fill hole, replace fill plug.
How do you change the rear differential fluid on a 2003 Ford Explorer?
If there is not a drain plug on the bottom of the differential then you will have to remove the rear cover. If that is the case you will need a cover gasket. If it is limited slip, then it will require a special additive. Also be sure of the weight and if it is synthetic or not.
