0
Ford Parts directory shows that Casting number as matching Part Number C5TZ-6392-B. Fits 1969 & 1970, 351 Windsor or 351 Cleveland Motors It will also fit 289 ('65 and up), 302, 240 and 300 6-cyls, as well as the 6-cyls used in pass. cars in that same era. Prior to '65, the blocks were drilled for the 5-bolt unit, as well as some '65s
What else can I help you with?
Will a ford 302-351w bolt to a 300 six cyl 4 speed bell housing?
The Ford 302 engine will not bolt to the 300 six-cylinder bell housing. A new bell housing or a Bell housing modification kit will need to be used.
Will a 2.3 ford bell housing fit a 2.8 ford?
no, it won't
Where is the bell housing on a 1992 Ford Ranger?
The bell housing is the front of the transmission ( the larger diameter portion ) where the transmission is bolted to the engine
Will the bell housing detach from the transmission in a 1997 Ford Taurus?
The automatic transmission housing / case is a single casting, so the bell housing cannot be detached separately.
Does Ford A4LD transmission have a removable bell-housing?
Yes you can change the bell-housing from 3.0 v6 or 4.0v6 and 2.5 2.3 4 cyls all have removable bell-housing hope this helps
How do you replace the Clutch Slave Cylinder on a 1994 Ford F 350?
is the slave cylander visable under the vehicle?some have the clutch cylander inside the bell housing. if you cannot see the slave cylander you will need to remove transmission and bell housing to get at slave cylander
How do you remove the bell housing bolts on a 2001 ford f150?
To remove the bell housing bolts on a 2001 Ford F-150, first, ensure the vehicle is safely elevated and supported. Locate the bell housing bolts, which are typically found around the perimeter of the bell housing connecting the transmission to the engine. Use a socket wrench with the appropriate size socket to carefully unscrew the bolts, ensuring to keep track of them for reinstallation. If any bolts are difficult to access, you may need to use a swivel socket or a longer extension for better reach.
1997 ford expedition how to replace bell housing bolts?
I personally remove my share of motor and transmissions in my time... I used a 3-foot extension from the bottom of the vehicle with the correct socket and ratchet you should be able to remove all the bell-housing bolts. With the proper floor clearance of course...
Where is the concentric slave cylinder on a 98 Ford Fiesta?
it is inside the bell housing
Is the bell housing the same on a Ford 460 and a Ford 351?
the bell housing bolt pattern is the same but the flywheel on 460 is thicker and makes they pressure plate hit bellhousing from 351m/400 there for it will not work you have to have a bellhousing from a 429 or 460
Where is the transmission pump on 1994 Ford Explorer?
The front pump is incorperated in bell housing
Can a 64 ford c4 trans be adapted to a ford 302 engine?
The C4 will bolt up to the 302 with the correct bell housing.
