0
What would cause the 4 wheel drive button light to just keep blinking off and on but not to engage into 4 wheel drive?
The 4 wheel drive light will do this most often if you try to switch into 4wheel low at a high speed, usually over 35 MPH. 4 wheel low is made mainly for when you are stuck and or when in mud or snow. If the question was for 4 wheel high. Stop the car press the button and it should stay on without blinking. If you suspect that it is not going into 4 wheel high or low. The valve unit that engages the gear may be the problem. Front underside of the transmission, has wires coming out of it.
What else can I help you with?
How do you engage 4 wheel drive in 2006 Suzuki xl7?
Press the 4WD button.
Why does the 4 wheel drive not engage when you push the button?
Regita love Marie-Claire
1997 jimmy electronic 4 wheel drive will not engage when pushing the botton. What are the possibilities?
check and make sure it contacts, theres not much room behind that button and any play may cause it not to connect, push the dash assembly around the button firmly with one hand and push the button with the other, does it light up and engage
How do you engage Honda Pilot 2004 4 wheel drive?
push the four wheel drive button on your dash, see owners manual
What would cause 4 wheel drive not to work on 94 GMC Jimmy?
could be the 4 wheel drive module located behind the glove compartment. If you don"t hear a click when you press the button to engage the module isn't working.
What would cause the 4 wheel drive to not engage on a 95 Chevy Blazer the module containing the 4x4 button was replaced the light does go on in 4 wheel hi 4?
the transfer case motor has to be replaced
How do you engage the 4WD on a 2001 Isuzu Rodeo?
there should be a button on your left of the steering wheel and if not, it doesn't have 4 wheel drive
Is it safe to drive an Audi a4 with a blinking check engine light for a 20 minute drive home?
i wouldn't... blinking means its bad, mine came on the other day and i called the dealer to see if it was ok to drive and they told me if its solid drive it in, if its blinking tow it in.
Kicks into neutral after a little while in 4wheel drive button engage what would be problem?
It may have the original transfer case that was recalled
Why will your blazer not engage front axles in four wheel drive?
It could be the shift motor on the T Case. Or it could be the automatic shift button switch on the dash.
Why is your flash drive blinking?
A blinking flash drive typically indicates that it is actively transferring data or being accessed by a computer. The light may also blink when the drive is powered on or undergoing a read/write operation. If the light is steadily on, it usually means the drive is connected but not actively being used. If the blinking is erratic or accompanied by issues, it could suggest a problem with the drive or the data being accessed.
My 4 wheel drive will not engage on your 1985 jeep wagoneer what could cause this?
Try checking the vacuum lines on the axle.
