0
What else can I help you with?
How can I convert a stereo unbalanced signal to a mono balanced signal?
To convert a stereo unbalanced signal to a mono balanced signal, you can use a stereo to mono summing device or a mixer. Connect the left and right channels of the stereo signal to the summing device or mixer, and then connect the output to a balanced input device. This will combine the stereo signal into a mono signal and balance the audio for better quality.
How can I convert an unbalanced stereo signal to a balanced mono signal?
To convert an unbalanced stereo signal to a balanced mono signal, you can use a stereo to mono summing device or a DI box. Connect the unbalanced stereo signal to the device, which will combine the left and right channels into a single balanced mono signal.
I took my stereo out and now my lights don't work?
I remove my stereo from my GMC Truck and now my lights don't work
What makes and models of VCR have stereo sound on the RF output signal?
Stereo VCRs have extra connections on the back to send the stereo to the TV or monitor. I don't believe you will find one with a stereo RF output. If you want to send a stereo audio signal to another room hook up a stereo modulator to the stereo RCA ouputs of the VCR and connect a MTS compatible TV to the coax at the other end and you will get the stereo audio.
If you change your stereo in your 94 Aerostar van will you lose your tail lights if it's a different kind of stereo?
no
Where is turn signal relay 97 Camaro?
Behide the stereo
What is the frequency of mono?
There is no frequency of mono. Mono is a one channel signal, stereo is a two channel signal.
What can you try after installing a new stereo in a 1999 Mazda that has no matching illumination wires from the stereo for the wires in the car and now the dash lights not to work?
Ive installed some aftermarket decks in late model mazda's , try wiring your own ground to get the dash lights back... seems the wire that the factory deck grounded with acts as a relay or something with a negative signal running through it
How do you fix the lights on the stereo that have burnt out?
To fix burnt-out lights on a stereo, first, unplug the device to ensure safety. Open the stereo casing, usually by removing screws, to access the burnt-out bulbs or LED indicators. Replace the faulty bulbs with new ones of the same type or, if applicable, solder in new LEDs. Finally, reassemble the casing and plug the stereo back in to test the lights.
Why is there no sound coming from my 2002 dodge neon stereo?
Check to see if the Neon stereo lights come on. If the radio lights up then there could be an internal problem or a problem with an external amplifier.
What does a Car Amplifier do?
It "amplifies" the signal of your stereo so it is louder to hear.
Where are the tail light fuses for a 1993 Honda accord LX located?
I have the same question - my son's car has brake lights, turn signals, backup lights, but no tail lights. I'm guessing this might mean a problem with fuses, but I can't seem to find the right fuse. Any help or insight will be greatly appreciated. If your son has recently fitted a stereo there is a chance he has shorted the tail light circuit and blown the fuse. Most cars have a wire going to the stereo which sends a batt+ signal to dim the backlight when the tail lights are turned on. Only thing is when the tail lights are turned of that wire is grounded. So some people confuse that for the real ground wire when wiring their stereo and create a dead short when the tail lights are switched on.
