The "OD" button on a 2003 Ford Ranger is used to control the overdrive feature of the transmission. When the button is engaged (OD on), the vehicle can shift into higher gears for better fuel efficiency at highway speeds. If you’re towing a heavy load or driving in hilly terrain, you may want to turn off overdrive (OD off) to provide more power and control. To use it, simply press the button on the gear shift lever as needed.
I believe you turn the radio on : press and hold the " CLK " button use the " SEEK " button to increase or decrease the hours use the " TUNE or TUNE DISC " button to increase or decrease the minutes
Press Clock button and hold then use seek and tune button to ajust hour and minute.
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
There is no fuel reset button. Ford was the only car company to use that.
My manual says Mercon ATF.
According to the 2003 Ford Ranger Owner Guide : For the 2.3 litre four cylinder engine and the 3.0 litre V6 engine ( 5W-20 ) For the 4.0 litre V6 engine ( 5W-30 )
if you use a very small hose you can like the type used in fish tanks
Factory sealed use spray lube well work
According to the 2003 Ford Ranger owners manual : 2.3 L and 3.0 L engines - the preferred oil is ( 5 W 20 ) 4.0 L - SOHC - V6 engine - the preferred oil is ( 5 W 30 )
The 2003 Ford Ranger Owner Guide only shows ( 1 ) type of engine coolant ( YELLOW color , meeting Ford specification WSS-M97B51-A1 ) * but it also shows to use the type of engine coolant your vehicle was originally equipped with
That would depend on what year of Ford Ranger and what size of engine it has
According to the 2003 Ford Ranger Owner Guide : It came from the factory with ( Motorcraft MERCON - V , automatic transmission fluid ) * the type used should be engraved into the automatic transmission fluid level dipstick