the Chevy aveo uses a timing BELT and it should be changed NO LATER than 80,000 miles
This is what I did: http://home.earthlink.net/~aveobot/id1.html
The water pump is the tensioner for the timing belt. if you need to adjust it, replace it.
It has a timing belt. Make sure that you replace it ever 60,000 miles. If it snaps on you, that is bad news!
It has a timing belt. Make sure that you replace it ever 60,000 miles. If it snaps on you, that is bad news!
Yes, it's possible for the timing to be 180 degrees out of phase even if the timing marks are aligned on a 2004 Aveo. This can occur if the timing belt or chain has skipped a tooth, leading to incorrect synchronization of the camshaft and crankshaft. In such cases, the engine may not run properly or could backfire, so it's important to verify the timing and ensure all components are correctly aligned. If there's any doubt, it's advisable to consult a professional mechanic for a thorough inspection.
To set the timing on a 2004 Chevy Aveo, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Remove the timing belt cover and align the timing marks on the crankshaft and camshaft gears. If necessary, adjust the timing belt tensioner, and then recheck the alignment of the timing marks before reassembling. Finally, start the engine to ensure it runs smoothly.
On a 2004 GM Aveo, the timing marks are located on the crankshaft and camshaft pulleys. The crankshaft mark is typically a small notch or dot on the pulley, while the camshaft may have a corresponding mark or indicator on the timing cover. When aligning the timing, ensure that these marks are in proper alignment according to the service manual specifications to maintain correct engine timing. Always refer to the vehicle's repair manual for precise details and diagrams.
if timing belt brakes while driving,will it damage motor.
I broke my key in the ignition and cant get it out. My only option I can see, is to replace to tumbler. How do I remove it?
It didn't replace it. The Chevrolet Aveo's name changed to Chevrolet Sonoc.
The timing marks for a 2004 GM Aveo are located on the crankshaft and camshaft sprockets. When aligning the timing, the crankshaft mark should be at the 12 o'clock position, and the camshaft marks should align with the marks on the cylinder head. It's essential to ensure that the engine is at top dead center (TDC) for cylinder one during this procedure. Always consult the vehicle's service manual for specific details and diagrams.
Well on a 2005 it is behind the timing belt. It is kinda hard to get to it took the auto shop 2.5hrs of labor. I hope this helps