It has a timing belt. Make sure that you replace it ever 60,000 miles. If it snaps on you, that is bad news!
the Chevy aveo uses a timing BELT and it should be changed NO LATER than 80,000 miles
To set the timing marks on a 2005 Chevy Aveo, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Locate the timing marks on the crankshaft pulley and the timing cover; align the mark on the crankshaft pulley with the TDC mark on the cover. Next, check the camshaft timing marks, ensuring they are aligned properly with the corresponding marks on the cylinder head. If necessary, adjust the timing belt or chain to ensure all marks are aligned correctly.
Most likely your timing belt broke.
It has a timing belt. Make sure that you replace it ever 60,000 miles. If it snaps on you, that is bad news!
torque setting for 2005 chev aveo
My 2005 aveo won't start
To install the overhead cams on a 2005 Chevy Aveo, first, ensure the engine is cool and disconnect the battery. Remove the valve cover to access the camshafts, then align the timing marks on the camshaft and crankshaft to the correct positions. Carefully position the camshafts in place, ensuring the timing chain or belt is properly aligned. Finally, reassemble the valve cover, reconnect the battery, and check for proper operation.
Locate crank shaft sensor 2005 Chevy aveo
To set the timing on a 2005 Chevy Aveo, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Then, align the timing marks on the crankshaft and camshaft sprockets according to the specifications in the service manual. If necessary, adjust the timing by loosening the camshaft sprocket bolts and repositioning the sprocket, then retighten the bolts. Always double-check the timing marks after adjustments to ensure proper alignment.
How do you change the wheel bearings on a Chevrolet aveo 2005
No!!!!! Many problems with the timing belt possibly costing thousands.
The 2005 Chevrolet Aveo OBD 2 port is under driver side dash next to kick panel