0
When replacing the convertible top latches how does the top strip above the windshield come off to get to the locking bolt?
it's glued on with contact cement glue
AnswerI just replaced the latch on mine. There was no glue or rubber cement, at least on my model. In order to remove the old latch:
- Open the soft-top halfway, so it balances with the frontmost portion in a roughly vertical orientation. The goal is to let it balance on its own, so you don't have to hold it. Alternatively, get a friend to hold it for you.
- Starting on one side, carefully wiggle the top strip panel straight away from the rest of the soft top. There is an indentation in the side of it where the locking bolt fits, holding it on.
- You need to carefully slide the panel away, so that the indentation comes away from the locking bolt.
- On mine, the passenger-side locking bolt was smaller than on the driver's side, but yours could be reversed (or they could be the same size). Be careful, and try each side with increasing pressure, to minimize the risk of breaking the paneling.
- Once one side of the panel is free, carefully pull the rest of the panel free. Be careful not to bend it enough to break it.
- Slide the other side of the panel away from the soft-top.
- Remove the locking bolt on the latch (mine was a 10mm bolt on the driver's side, and a larger Phillips screw on the passenger side).
- Unscrew the two (Phillips) bolts on the bottom of the locking mechanism
- Slide the entire assembly out the front of the front
What else can I help you with?
What are the different types of gate latches available in the market?
The different types of gate latches available in the market include gravity latches, padlock latches, key-operated latches, and self-locking latches.
My windshield wiper goes off the windshield?
Replace the locking tab on top of the wiper
What are some important factors to consider when choosing wooden gate latches for a garden gate?
When choosing wooden gate latches for a garden gate, consider factors such as durability, security, ease of use, and compatibility with the gate design. Look for latches made of sturdy materials, with a reliable locking mechanism, and that are suitable for the size and style of your gate.
How do you remove the windshield trim on a 1968 Chevy Impala?
To remove the windshield trim on a 1968 Chevy Impala you will need a trim removal tool that has slides which can release the locking clips.
1990 Toyota 4 runner 4x4 you are replacing the front end so you have manual locking hubs is the cv boot from the automatic locking hubs the same as the cv boot for the manual locking hubs?
No.
How do you replace an interior door handle on a Hyundai?
The interior door handle on a Hyundai latches onto the locking mechanism of the door. First remove the old handle by unscrewing it from the door panel. Pull the handle out and remove the locking wire. Install the new unit with the locking mechanism in place. Tighten the mounting screw.
Why is there a red light blinking in your dash windshield?
That's the warning light for your burglar alarm. Locking the car turns it on.
How do you remove the sunroof for 1988 Porsche 944?
Raise the roof, unclip it from the inside, slide it out. Actually, that answer is incorrect ! The latches that raise/lower the sunroof must be disengaged before it can go anywhere. They are controlled by placing the ignition switch into the #1 position and, using the roof control switch, causing the latches to fully retract into the roof body. The roof is now free to be maneuvered. It can now be removed by releasing the interior locking clips at the windshield and lifting it out from within. Note that it is quite heavy, and 2 persons are recommended.
How does the fuel door open on a 1987 jaguar xj6?
You press down on the right side and it pop's open. If this does not work the fuse for your central locking must be out and needs replacing. You press down on the right side and it pop's open. If this does not work the fuse for your central locking must be out and needs replacing.
Replacing a lock cylinder for a 94 Ford Thunderbird?
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
Why does a 1999 firebird trigger headlights to raise then lower when locking the doors?
Mine has been the actuators for the headlights that needs replacing.
What type of products does Autoloc sell?
AutoLoc sells various types of automotive parts. This company carries automatic locking seatbelts, door latches, as well as remote control systems for car door locks.
