To add automatic Transmission Fluid to a 1960 Ford Thunderbird, locate the transmission dipstick tube, which is usually found near the rear of the engine bay. Pull out the dipstick, wipe it clean, and reinsert it to check the fluid level. To add fluid, use a funnel to pour the appropriate type of automatic transmission fluid into the dipstick tube, ensuring not to overfill. Always check the owner's manual for specific fluid recommendations and capacity.
126 mph.
fuse box location in a 1960 thunderbird
The Brothers Brannagan - 1960 Thunderbird 1-23 was released on: USA: 18 March 1961
The issue you're experiencing with your 1960 Ford Thunderbird may indicate a problem with the transmission, specifically related to the first gear engagement. The whining noise could suggest that internal components are not properly engaging or that there may be low fluid levels affecting performance. It's advisable to check the transmission fluid level and condition first; if the fluid is low or burnt, a change might resolve the issue. If the problem persists, further inspection by a professional mechanic could be necessary to diagnose and repair any internal transmission issues.
The 1960 Thunderbird was 12 volt negative ground. The 1955 Thunderbird was 6 volt positive ground and 1956 and up was 12 volt negative ground.
1960 Ford Thunderbird
No, there were many automatic transmissions in the 1960's.
There is an inside hood handle. The hood opens from the rear
1960
The maximum speed of the Chrysler new yorker automatic 2 door 8cyl 350hp 1960 is 3000 rpm.
100-325 USD
put your head under your seat and than u will see a button that is red press it and your trunk will open