0
To place jacks on a 1999 Dodge Intrepid, locate the designated jacking points, which are typically found under the vehicle's frame near the front and rear wheels. For the front, place the jack under the reinforced area near the lower control arm, and for the rear, position it under the rear axle or the frame. Always ensure the vehicle is on a level surface and use jack stands for added safety once the vehicle is lifted.
What else can I help you with?
How do you change the power window motor on a 1999 Dodge Intrepid?
1999 dodge intrepid rear windo don't know working i change 2 time same place you can Email .e sunilpatel2002@hotmail.com
Will a 3.3 work in place of the 3.5 in a 1995 Dodge Intrepid?
Not without swapping alot of other parts
Where does antifreeze go in a Dodge Intrepid?
Depends on the year, but in most, under the hood is a place It's called Coolant.
How do you change the radiator on a Dodge Intrepid?
Chilton Manuals are a good place to start - here's a link to the online version... http://www.chiltondiy.com/default.aspx
What does code po0740 mean on a 2002 Dodge Intrepid?
It's a solenoid inside your transmission, you will have to take it to some place lie Aamco for more.
Where is the best place to put a jack stand on a 2000 Dodge Intrepid when replacing front driver side tire?
I place them under the suspension cradle (the large metal framework).
Is the location of the thermostat on the 2002 Dodge 3.5 liter Intrepid in the same place as the 2.7 liter?
Yes, it is located where the lower hose hooks to the engine.
Do you need a tool to align the camshaft sensor on a 2001 Dodge Intrepid?
no, there is one bolt that holds it in place, so no need , just a 10mm socket
Is there an motor that would be interchangeable with an 2002 dodge intrepid with an 2.7 motor?
yes but u need to go to the place where you brought the to ask the car dealer
Where are the Jack points on Dodge Intrepid?
Raise the Intrepid. Lift up on the front jack point with the floor jack. Use the front jacking point behind the radiator. Place jack stands under the pinch welds on either side of the vehicle's body underneath the front doors. Then lower the Intrepid onto the stands.
How do you change blower motor resistor for Dodge Intrepid 1999 Where is it located?
its down under the pass side dash two screws hold it in place and one plug
Why can't I get any heat from my heater on a 1998 Dodge Intrepid that has been flushed and a new thermostate put in it last fall?
maybe you have air in your system, there should be a place where it can be bleed.
