OBD2 plug is located Below steering column and to the right, it is behind the knee bolster. Plug is facing vertical,so you may have to lie on floor mat and look up.
Plug in an OBD2 code reader. You can borrow, rent or purchase an OBD2 code scanner at most auto parts retailers.
To plug in a code reader for a 2003 Chevy Tracker, locate the OBD-II (On-Board Diagnostics) port, which is typically found under the dashboard, near the driver's side, just above the pedals. You may need to remove a small cover to access it. Once you find the port, simply connect the code reader to it, and you can begin diagnosing any issues with the vehicle.
well on my 2000 Chevy tracker it is an egr flow malfunction. Girl at autozone said it could be a egr blockage.... Mike
you have to hook up a special reader to your computer to find out the code.
A code reader that will work on the OBD I system.
Hi, It's under the dash on the drivers side just to the left of the brake, but closer to the front. Just look for a plug-in that matches the obd reader plug. Hope this helps Hi, It's under the dash on the drivers side just to the left of the brake, but closer to the front. Just look for a plug-in that matches the obd reader plug. Hope this helps
you can use the yellow obdII cable.
I've tried an OBD 11 code reader and while it seems to plug in correcting it still coannot communicate with scanner
under the drivers side of the dash above the gas pedal
Ckp sencer
color code for 2000 Malibu is under lid on spare tire carrier in trunk.
catalyst system fault