To add brake fluid to a 2002 Jeep Wrangler, open the hood and locate the brake fluid reservoir, which is typically found near the driver's side, attached to the master cylinder. The reservoir is usually marked with a cap labeled "Brake Fluid." Remove the cap and check the fluid level; if it's low, add the appropriate type of brake fluid (usually DOT 3) until it reaches the recommended level. Be careful not to spill any fluid, as it can damage paint and other surfaces.
Dot 3.
DOT 3
A 1991 Jeep Wrangler uses DOT 3 brake fluid.
Dot 3 brake fluid
DOT 3
Dot 3
A 2000 Jeep Wrangler would use Dot 3 brake fluid. Dot 4 is also acceptable. Just do not use Dot 5, it is not compatible.
Dot 3 brake fluid.
The 2002 Jeep Wrangler OBD 2 port is below instrument panel, left of brake pedal
Dot 3
DOT 3
Dot 3