0
You must listen real good to do this right.
Take the distributor cap loose so you can raise it up and see the rotor. Now get someone to help you with this. Take the #1 spark plug out, That will be the first plug up front on the driver's side head. Now put you finger over the plug hole and get your helper to bumb the engine over a little at a time until you fill air blow out from under your finger and as soon as it quites blowing pay attention to were the rotor is pointing in the distributor and mark it with something so you can see the mark when you set the cap back on the dist. And that terminal on the cap will be where the #1 wire goes.
You may have to bumb the engine over a few times until you get the fill of it to get it right. Then wire it clockwise on the cap. If you need more help then let me know.
What else can I help you with?
Where do you start number 1 plug wire on distributor cap on a 440 Dodge engine?
To find the number 1 plug wire on the distributor cap of a 440 Dodge engine, start by locating the distributor and the cap. The number 1 cylinder is typically the driver's side front cylinder (nearest the radiator). From there, follow the rotor's rotation direction (usually counterclockwise) and place the number 1 wire in the corresponding position on the cap, then continue placing the other wires in the proper firing order.
Wheredoes the firing order start on 350 distributor cap?
At spark plug location number 1. Number 1 plug is on the drivers side front of engine.
Where does number one start on the distributor cap on a dodge durango 8 cylinder?
anywhere you want it to, preferably towards the front pointing towards the NO. 1 cylinder. If you still have the wires on trace the NO. 1 cylinder back to the cap via the wire Hope this helps Usually the cap has #1 stamped on it.
Where is no 1 terminal on f134 distributor cap?
Should have a small number 1 on the top of the cap.
Where is number 1 located at distributor cap?
Front righthand side of cap
Where is number 1 plug start on distributor cap for Dodge 360?
On a Dodge 360 engine, the number 1 spark plug wire typically starts at the distributor cap at the terminal located at the 5 o'clock position when the cap is oriented with the rotor pointing to the number 1 cylinder. The firing order for the 360 is usually 1-8-4-3-6-5-7-2. Ensure the engine is at top dead center (TDC) on the compression stroke for cylinder number 1 when setting the timing and routing the wires.
Where is number 1 cylinder on 302 ford cap?
The marked # 1 position on the distributor cap faces to the REAR
Where is number 1 on the distributor cap of a 1994 d15b7 Honda?
Number 1 on the distributor cap is the top post closet to the firewall. Looking at the distributor cap it would be... top row 1-3 bottom 2-4
Where is number 1 dist marking on cap fo a 1992 Chevy 350 van?
the cap doesn't have a #1 mark on it.
Which wire is number 1 on vortec 4.3 distributor cap?
where is number one on a vortex 4.3 v-6 distributor cap
How do you know where to put the number 1 plug on the distributor of a 1994 dodge ram 1500 4x4?
The cap should have a #1 mark.The cap should have a #1 mark.
How does a 460 distributor cap go on?
The marked # 1 position on the distributor cap faces towards the REAR
