The ignition switch for this vehicle is located on the steering column right by the steering wheel. It should be in easy reach to put your key in and go.Ê
Plymouth does not use inertia/reset switches
The speed control switch is on the steering wheel.
Plymouth does not use inertia/reset switches.
To check the ignition switch on a 1999 Plymouth Voyager, first ensure the vehicle is in the "Off" position and disconnect the battery. Remove the steering column covers to access the ignition switch. Use a multimeter to test for continuity by connecting the probes to the switch terminals while turning the key through the various positions (Off, Run, Start) to ensure proper functionality. If there is no continuity when the switch is turned, the ignition switch may need to be replaced.
In a 1991 3.3l the oil pressure switch is located beside the oil filter
a voyager doesn't use an inertia switch
It is on the power steering pressure hose.
Usually on the upper end of the brake pedal
the reverse light switch is usually mounted on the shifter inside the car.
fuse box under hood by batter
No. A 1996 Plymouth does not have a reset switch.
The 2000 Plymouth Voyager 2.4 liter engine radiator cooling fan relay switch can be found in the fuse box. The relay switch will be in the third column, fourth from the top.