The problem could be in the gear selector or the shifter linkage. Ensure the selector is not broken. Also, make sure that the neutral safety and the brake interlock switch are working simultaneously.
At the end of the starter motor shaft. Remove the starter and look in the opening that faced the transmission and you will see the gear.
To turn off overdrive in a 2003 Pontiac Grand Am, locate the gear selector on the center console. There should be an "OD" (overdrive) button or a switch on the gear shift. Press this button to deactivate overdrive, which will typically illuminate a light on the dashboard to indicate that overdrive is off. Remember to switch it back on for normal driving conditions when you no longer need it.
Not sure what you mean by transmission selector sensor. The transmission range sensor reads what position you have selected with the gear shift lever.
The neutral safety switch on a 2000 Pontiac Grand Am is typically located on the transmission. It is mounted on the transmission case, usually near the gear selector lever. This switch ensures that the vehicle can only be started when the transmission is in the neutral or park position. If you're having trouble locating it, consulting the vehicle's service manual can provide specific details and diagrams.
depends on how fast you are going and what gear you are in
Need to know what the problem is. Need more information.
My 94 Pontiac grand am se quad 4 the clutch is real loose and 1st gear is slipping
On our 1995 Grand Prix, the second gear start is automatic in adverse road condtions (Ice, Snow & Rain) I was told that when the wheels spin, it enables the Second Gear Start to provide better traction and power to the drive wheels. on the left hand side of dash panel down at the bottom
To adjust the selector switch on a 1994 Ford automatic transmission, first, ensure the vehicle is in the "Park" position and the ignition is off. Locate the adjustment mechanism, which is typically found near the transmission linkage. Loosen the retaining bolts, align the switch with the proper gear position, and then tighten the bolts securely. Finally, test the selector switch to ensure it functions correctly through all gear positions.
change bulbs in gear selector of 2001 oldsmobile aurora
==headline==