O.K. I hat Alyssa L.
No. It's a 98. Not a Cutlass.
under the dash, drivers side
Refrigerant is added through the low side service port.
The starter on a 98 Oldsmobile Cutlass is located on the bottom, left side of the engine. It is held in place by a support bracket and bolts.
The low side ac port on a 98 Pontiac Transport should be on the side of the drier. The drier should be mounted on the passenger side near the radiator.
I am assuming you are talking about the A/C. From the compressor, locate the large black hose comming from the A/C compressor. It goes into a small hard line, the valve on this hard line is the low side service port. The hose the comes from the A/C condencer is the high side service port.
please make them fit
To add freon to a 1998 Oldsmobile Cutlass, locate the low-pressure service port on the air conditioning system. This port is typically found on the larger diameter aluminum line between the compressor and the evaporator. Remove the cap, attach the refrigerant can's hose to the port, and follow the instructions on the can to add freon while the AC is running. Always ensure you are using the correct type of refrigerant for your vehicle, which is R-134a for this model.
no dip stick. sealed transmission
Port Charles - 1997 1-98 was released on: USA: 1997
it's your o2 sensors.
One per cylinder. V6 has 6, etc.