0
It should be behind the steering wheel, under the dashboard. It's not easy to get to. If you can locate the fusebox, which is under the dashboard, close to where your left knee would be while you are seated in the driver seat, the ECM is mounted closer to the engine, up behind the fusebox. The ECM is a gold-colored box that's about the size of a CD case that has 15 or 20 CDs in it. Three bolts hold the ECM to the body of the car, and two separate wiring harnesses feed in to the ECM, and snap in to place. You should be able to see the mass of wires connecting to the ECM if you more-or-less turn yourself upside down and stick your head down there under the steering wheel and look up towards the fusebox, which should easily be seen. Once you've found the fusebox, look more towards the front of the car and you may be able to see a mass of wires all feeding into a small rectangular gold-colored box that measures about 5" x 5" x 1" deep.
What else can I help you with?
Where is the ecm fuse on 97 Geo Metro 4-cylinder?
same as the coil located inside the car underneath the dash drivers side.
Where is the ECM located on a 1992 Geo Metro?
The Engine Control Module (ECM) on a 1992 Geo Metro is typically located under the dashboard on the driver's side, near the steering column. It may be secured to the vehicle's firewall or mounted on a bracket. To access it, you might need to remove some trim pieces or the cover under the steering wheel. Always consult the vehicle’s service manual for specific instructions and safety precautions.
Where is the ecm on 1994 geo prizm?
Passenger side floorboard under carpet.
Where is the ECM located 1994 buick park ave?
The ECM is located under the right hand side of the instrument panel.
Where is a 1994 GMC Jimmy ecm located?
near the intake.
Where is the ecm fuse located on the engine block of a 1994 Oldsmobile cutlass supreme?
The ECM fuse is located inside the car. Open the little glove box, and pull out the liner. From there you can see the Fusebox. It is labelled ECM
Where is ECM located on Geo Tracker?
The PCM is located on the left side of the dash. Remove the speaker grill and then remove the speaker to gain access.Read more: Where_is_the_electronic_control_module_on_a_1992_geo_tracker
How do you read 1996 Geo Metro trouble codes?
1996 Geo metros have a OBD-II ECM in them, to read the codes you need to either get a code reader/scanner, which plugs into a receptacle under the dash below the steering column, or you need to take it to a mechanic.
Where is the ECM located on your 2000 Jimmy?
where is the ECM located on my 2000 Jimmy? where is the ECM located on my 2000 Jimmy?
How do you change the ECM on a 1994 Buick Lesabre?
I do believe on your model the ECM is located under the right hand of the instrument panel. If you really need to remove the ECM I would likely suggest a Haynes repair manual for this operation.
Could it be the ECM if a 97 Geo Metro runs for a week then it will have a problem starting and there seems to be no power to the throtle body injector?
My ECM on a 1993 Metro just went out and it was similar to what you are experiencing. Mine mimicked fuel system problems, but I took it to a mechanic w/ all of the diagnostic equipment, and he was able to diagnose the faulty ECM. This saved me from unneccessarily replacing fuel system parts, and was well worth the money. I found the ECM for my engine/transmission off of Ebay for $21.00 shipped. You can also get them off of the internet rebuilt for $200.00, and used for $150.00.
Where is the ECM fuse located on a 1994 Chevrolet Cavalier Z24?
It is in the fuse box on the driver's side, bottom of the dash.
