EGR Valve
4.2L, 4.6L, 5.4L and 6.8L Engines
1. Disconnect the negative battery cable.
2. Remove the vacuum hose from the EGR valve.
3. On the 4.6L engine, remove the nut and brake booster bracket.
4. On the 5.4L engine, remove the DPFE sensor retaining nuts and place the sensor to the side to allow access to the EGR tube.
5. Disconnect the EGR valve-to-exhaust manifold tube from the EGR valve.
6. Remove the EGR valve mounting bolts, then separate the valve from the intake manifold.
7. Remove and discard the old EGR valve gasket, and clean the gasket mating surfaces on the valve and the intake manifold.
To Install:
8. Install the EGR valve, along with a new gasket, on the manifold, then install and tighten the mounting bolts.
9. Connect the EGR valve-to-exhaust manifold tube to the valve, then tighten the tube nut to 25-35 lbs. (34-47 Nm).
10. Connect the vacuum hose to the EGR valve.
11. On the 5.7L engine, install the DPFE sensor.
12. On the 4.6L engine install the brake booster bracket and the retaining nut.
13. Connect the negative battery cable.
Where is the EGR valve located on a 2000 Ford Explorer
On a 1998 Ford Explorer, the EGR valve is located on the intake manifold. It is behind the throttle body.
egr valve location on a 1997 ford ranger 23l
where is egr valve on 1998 ford contour
The EGR Valve is located in the engine compartment on the Ford Focus. The EGR Valve is set almost dead center into the top of the motor. The EGR Valve looks like a small carburetor with caps on the top and sides.
PCV Valve is located on the Right Valve Cover.
egr valve on 5.8l is located on top of engine, passenger side front bolted at intake
The 1993 Ford escort did not come with an EGR valve. It is one of a few year models that do not have one.
On newer vehicals the egr valve is located on ignition emissions system and on the older vehicals it is located on the intake manifold..
On the firewall next to the EGR vsv.
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
Should be located on the intake manifold.