The EVAP canister on a 1997 Ford Ranger is located on the driver's side, typically mounted near the rear frame rail, just in front of the fuel tank. It is a black plastic canister that collects fuel vapors from the fuel system. To access it, you may need to raise the vehicle and remove any protective covers or shields that may be in the way. Always ensure safety precautions are taken when working under a vehicle.
P0443 - EVAP control system CANISTER PURGE VALVE CIRCUIT MALFUNCTION - VPWR circuit open - Evap canister purge valve circuit shorted to ground - damaged EVAP canister purge valve - EVAP canister purge valve circuit open - EVAP canister purge valve circuit shorted to VPWR - damaged PCM
The EVAP canister purge solonoid on a 1997 Taurus 3.0L OHV is mounted on the firewall on the passenger side between the strut tower and the engine computer multi-plug. Note: you will see the green EVAP test cap on the plastic line that connects to the canister purge solonoid.
Your Chevy1997 S-10 came with an owners manual when you purchased it. If you look in it, you should find a diagram of an evap canister. This will help you navigate things easier.
on the fender rh if your truck is 97, and beside to the gas tank 98-05
what are the years and kinds of Automatic transmissions that will fit in a 2.3l 97 ford ranger 4x2
Depends on what you are trying to swap. Most parts are some are not.
Trouble code P0443 means: EVAP Canister Purge Volume Control Solenoid Valve
P1151 and obd fault code solution for a 97 ford ranger
it does.my 2.3 ranger has one so yours should
The transmission is bolted to the back of the engine
not fuses or relay?
Exterior panels: 93-97 Bed: 93+ Interior Panels: 95+ www.FordRanger.net