It is mounted on the distributor plate under the cap and rotor. On the right hand side of the distributor when looking at it. It will have electrical connectors plugged into it on both ends.
where is the pcm module located on my 1997 Chevy truck
The 1999 Chevy S 10 pickup truck ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
Where is the control module located on the 1983 Chevy blazer
Lower passenger side of engine block, the coils are attached to it.
The Distributer module on "92" S-10 Vin code "W" or "Z" is located on the distributer,you must remove the distributer cap to gain access to the ignition module. Once you have gained access to the ignition rotor it is always necessary to always test the module before replacing it.
The ignition module is located in the distributor, under the distributor cap.
The 1992 Chevrolet Corsica ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
It is inside the distributor
module locatedwhere is the module on a 9 Chevy blazer
In a 1988 Chevy pickup the ECM is located behind the glovebox.
The ignition module that is in the distributor is probley bad.
If you remove the distributor cap and rotor you will see it bolted to the plate and it will have electric wires pluged into it. It will be on the right side of the distributor.