i would like to know how to remove the panels for the interior side lights to change the light bulbs
communication error with engine control modue.( CAN message ).
How do you replace interior door courtesy lamp?
you have to remove the driver seat belt and remove the panel it is behind there
Could be the interior lamp switch which is activated by raising the outside door handle or pressing a code button on the electronic door lock control system.
It isn't.
Where can I locate the "Lamp Control Module" on a 1994 Buick Park Avenue
No, incandescent lamp dimmers are not compatible with fluorescent lamps. Fluorescent lamps require special dimming ballasts to control their light output. Attempting to use an incandescent lamp dimmer with a fluorescent lamp can cause damage to the lamp and dimmer.
The manipulated variable in making a lava lamp is the temperature of the lamp, which can be adjusted to control the movement of the colored blobs in the lamp.
Yes, a touch lamp can be converted to a regular electric lamp by replacing the touch-sensitive module with a regular on/off switch. This involves disconnecting the touch control system and wiring in a traditional switch for manual control of the lamp.
It is behind the passenger foot molding, just in front of the door. It pulls off. it is a 2x2 black box with a terminal of about 7 wires or so
fuse box in side the car
To control the brightness of your lamp using a dimmer plug, simply plug the dimmer plug into the wall outlet and then plug your lamp into the dimmer plug. You can then adjust the brightness of the lamp by turning the dial or sliding the switch on the dimmer plug.